If you are a Windows user 10, you may have observed the code 43 suspending a device in the error log. To solve this problem, We invite you to read this article where we explain how to fix the device descriptor request error Windows 10 ‘Error 43’.
Why does the error appear 43 de USB en Windows?
Among the causes of the error 43 Windows 10 a bad connection of an external device via USB is found, the presence of a damaged cable, a failure in an internal device or problems in the BIOS identification.
In some circumstances, the error 43 Windows 10 It may occur due to some conflict with the graphics card or the presence of corrupted files in the system.
What does the error mean 43 on a Windows PC?
The error 43 Windows 10 refers to a device manager error. In this circumstance, as the hardware is not correctly identified, the code is generated “43” informing the user that it is necessary to stop the device in case a problem is found. by operating system.
How the descriptor request error can be solved
If you have observed a message with code 43 In Windows 10 do not worry because it is possible to solve this problem through a series of steps that we present below.
Update drivers
The first step is to verify the video card driver that has been installed on your computer to find out if the driver needs to be updated. Type in Windows browser “Device administrator” and look for display adapters.
Later, right click on the device that corresponds to the graphics card and select the option “update driver”. Click on “Search for automatically updated driver softwareAnd wait a few seconds while the system locates the driver and installs it on your computer..
Repair files with errors
Often, buggy files in windows cause the error 43. To troubleshoot errors in Windows, you must access the command prompt with the command “cmd” and write SFC. Later, press "enter" and wait a few minutes while the system takes care of the analysis and the file repair in case they meet.
Do a system restore
Possibly, update errors in Windows generate the code 43. Then, you can apply a system restore. To make it, scribe “Control Panel” in the Windows search engine and access the section “Security system”. Click on “System” and select the option “Advanced system settings”.
Click immediately on the tab “System protection”. Finally, Press the button “Restore system” and choose a restore point which corresponds to an earlier date when your computer had no errors.
What can I do if my PC still doesn't recognize my USB?
If you still have problems with USB recognition on the computer, we can take the following actions to try to fix the problem. We must check in each action if it already recognizes the USB and we can also restart the computer.
Check the other drivers
It is imperative that all drivers work optimally. To check, go to device administrator and check if the yellow triangle symbol is displayed on the left side of the device.
If this symbol appears, right click on the device and proceed to update the driver as explained in the previous step or search for the driver on the manufacturer's website depending on the hardware.
Try the device on another computer
If an external device is causing the error, you can connect it to another computer to see if it works. If you get the error again 43, try uninstalling the usb controller of your team. If it does not work, proceed to replace the device.
Uninstall the USB driver from your computer
To uninstall the USB driver you need to connect the device to a USB port, type in search engine devmgmt.msc and press the key “Enter”. You can also write “Device administrator” in the Windows search engine to see all the devices on the system.
Click on the category “Universal serial bus controllerAnd check the list of devices that are failing. You may notice that these have the yellow triangle symbol or appear as “Unknown Device”. Select option “Uninstall”, restart your computer and see if the error has been resolved.
