Through this basic guide we will teach you what you can do to erase black and vertical lines or streaks that appear on copies of a photocopy, We will tell you the most basic things that can help you erase this problem.
In the same way, figuring out how to correct horizontal or vertical line streaks in your prints might also be very helpful if you're having trouble.
What causes black streaks to appear on copies or scans??
Black streaks on copies are usually due to the fact that the glass of the machine is dirty. And not only this, rather it can be generated by liquid present in the scanner or, failing that, on the corona filament, resulting in a black or dirty streaked print. In other words, a totally damaged document. For this, it is advisable to keep the equipment in constant maintenance to avoid this type of errors. Despite this, Care must be taken when inserting the paper to avoid further damage to the device.
How do I remove black lines from copies?
Printers / photocopiers are complex instruments, anyway, the frequent problem of black stripes can be easily fixed In most cases. Before this, We suggest trying the following to eradicate this problem.
Clean the scanner glass
Scratches when making a copy are often caused by dirty glass on the machine.. So, if you have this problem when making enlargements or reductions on a copier, the best is clean the glass to erase any type of dirt that may arise.
It is best to use a tissue, but it is very important that it does not release residues / fluff, at the same time, it is recommended to be soft. Added to this will be used isopropyl alcohol, if feasible with a high degree of purity (70% upwards).
Soaking the tissue in a little alcohol gently wipes the top of the scanner and proceeds to clean the surface of the glass. Despite this, it is also recommended to clean the rest of the areas.
It is very important that, when cleaning, realize that there is not too much dust in the environment, since these residues can go to the scanner and interfere with cleaning. After running the cleaning procedure, run a test copy to see if the problem is fixed.
Check the connections
This is very extrange, but in some cases the electrical interference can cause problems like vertical streaks when photocopying. Before this, it is advisable to verify that all the machine connections are in order. This varies by printer model / copier you own, despite this, try the following:
Absolutely turn off the printer / copier.
Disconnect all cables. It is highly recommended that you wait a few seconds before reconnecting them.. In general it is recommended wait at least 30 seconds before reconnecting them.
After connecting, check that all cables are connected correctly. If so, turn the machine on again to see if the problem persists. At the same time, it is important to highlight refilling the printer ink cartridge / copier if running low.
Virtually all reputable companies have a customer service center, through which you can have access to technical service. If after properly cleaning your printer / copier, check connections, etc., still has problems, maybe the best thing you can do is go to an expert.
When searching directly in the manual or on the Internet, you can find the right customer service center for your area / country. Most of the time there are national branches of the companies, that can address certain problems.
Despite this, if this is not the case, You can also resort to help from an expert technician outside the manufacturing company. If you choose this, it is imperative to use the services of an experienced person. On the other hand, at no time open the printer / copier if you don't know what you're doing.
On the other hand, if you still have problems or cannot repair your computer, consider buying some of the best all-in-one printers.
Ink levels
This is one of the most basic methods of erasing black streaks from prints.. And it is that even when you do not believe this plays a very fundamental role in this procedure, the use of absolutely original inks has become an almost essential requirement to obtain a good result. For this, there are codes and programs on the web that allow you to restart them remotely with just one click.
But this method is now obsolete. So, can do it directly from your printer, go to the control panel of your device and then click on the Printing Preferences section. There a window is broken down where it will indicate the ink levels, recharge it if necessary and then press the option to reset the ink levels. Wait for the procedure to complete and select accept.
Cleaning
This procedure is recommended to do it at least every three months. Despite this, to keep our equipment in optimal condition, it is recommended that it be carried out by a specialized computer technician. Since these machines contain quite delicate parts and that if they are not handled correctly they can be damaged. Therefore, to avoid minor expenses it is essential to go to one of them.
Your computer configuration
If the above alternatives do not solve this problem, this may be due to a computer configuration problem. To do this, first you must go to the control panel and click on the printer properties, there you will observe the printer values and verify that everything is correct. If the problem persists, uninstall the printer drivers again and install them again so that the problem disappears and the initial settings are restored.
Other possible solutions
Check the led of your printer, it is probably damaged or even dirty and may be causing this problem. Right in the equipment manual the location of the led is enabled. Dampen a cloth in isopropyl alcohol and wipe it. this in some cases can also fix black streaks when printing.
What do you do when the printer prints with stripes?
In the first instance you must perform an injectors test to check if any of these are obstructed or have a specific obstacle. If this does not solve the problem, you can proceed to clean the print head, that if it is dirty or damaged it can be the main cause of black stripes in your prints. Always remember to use the correct paper, because even if you don't believe it, this can also be a cause of this problem.
Injector test
The problem may be due to a clogged injectors, either by a pigment in the ink, a dirty one or even an air bubble. First we go to the search engine of our pc and we go to the configuration of the printer connected to your device. There you will press right click and in the window that will be displayed on the screen you will select the option manage. In the alternatives that are shown you will choose the one that says printing preferences. In the chapter that will open, all the information about the device will be explained to you, this will vary by model.
In the section that appears above just on the right side you are going to do click where it says maintenance. There we select the injector test option, If the printer comes out with streaks, it is because cleaning is required. Press the option to clean and then accept.
Use the right paper
To set the ideal paper for printing you need Be clear about the type of printing you want to make.. Surely the final result of the job will depend on the quality of the paper used. For common and low-color printing, it is recommended to use plain paper. 80 gr. But if the print has a lot of color, will tend to wrinkle and get stuck. Since they are not manufactured for this type of format. Digital color printing always requires a higher grammage than commonly used.
Also always use the DIN A-4 standard size paper this ensures better performance when printing. Also store the paper properly, it's definitely something your printer will thank you for.
Align the print head
For this you must access printer settings from the control panel. Then select the properties option and then select the head cleaning option in the sale. Select start and the device will automatically start the procedure. This is based on passing ink through the nozzles of the head so that the obstruction that it has flows, and in this way erase the problem. It should be noted that using non-genuine inks can make this a much more common obstacle.
Check ink levels
This is a very easy step but definitely very essential., for this go to the printer settings and right click on it. Later select maintenance option. The box that will appear on the screen will show the ink level of each of the colors that the printer has and will indicate whether it should be recharged or not.
Other solutions
In case of not fixing this problem. Go directly to a technician specialized in electronic equipment and report your problem. Your printer may require much more complex procedures that only trained personnel can solve.
