Automatic repair Your PC did not start properly

The error of $ 0027 Your PC did not start properly $ 0027 it is often caused by a corrupt MBR or BCD file due to Windows not starting. When you turn on your system, your Windows normally starts up and takes you to the Desktop screen, However, in this case, you are left with a message box allowing you to reboot your system or navigate to Advanced options.

In some cases, the problem is easily solved with automatic Windows repair when the system is restarted, However, that doesn't work for everyone. If the error persists even after multiple starts, means that the MBR is damaged. In this case, You can apply the following solutions to fix the problem.

Your PC did not start properly – Windows automatic repair 10

What Causes the Automatic Repair Error “Your PC did not start properly” in Windows 10?

As the mistake is sudden, it may be due to one of the following factors:

• Sudden power failure . If the error appears after a sudden power failure, it is very possible that this is the cause of the error. Power outages are known to cause such problems.
• PC upgrade . In some cases, a recent PC update can also cause the problem. The update process may have corrupted the MBR file due to the error encountered.
• Third-party application or a recent hardware change . Sometimes, a third-party app or recent hardware change to your system may cause the error to appear, in which case you will have to run a system restore. This is pretty weird, but it's still a possibility.

You can fix this error by following the solutions given with a bit of luck on your part.

Solution 1: restore running system

As we mentioned, in some cases, a third-party application installed on your system may cause the error. In these cases, you will have to opt for a System Restore. A system restore will restore your system to a point where the error did not occur. Therefore, this will eliminate the possibility of a third party app causing the error. Here's how to do it:

1. In the Automatic Repair message box, click on $ 0027 Advanced Options $ 0027. Access Advanced Options by clicking Advanced Options

2. Choose $ 0027 Restore system $ 0027 and follow the process. Choose System Restore from the advanced options

What's more, It's important to put attention on, in some cases, restoring the system to some extent does not fix the problem. In that case, try restoring your system to an even later point to see if that helps.

Solution 2: repair the system with a USB drive / bootable DVD

Sometimes, when Windows Automatic Repair doesn't fix the problem, system repair from Windows Recovery Environment (WinRE) Can work. To do this, you will need a USB drive, bootable CD or DVD, either one will do the job. Here's how to do it:

1. Insert your boot drive.

2. Booting from the boot drive.

3. Once the Windows settings window appears, click on $ 0027 Repair your computer $ 0027 at the bottom left of the window. Repair Windows from WinRE

4. Follow the process and see if it helps.

Solution 3: repair system files using command prompt

If the above solutions don't work for you, you can try to repair MBR file using command prompt. The Master Boot Record or MBR informs your system about the location of the operating system. The cause of the error is usually a corrupted MBR or boot configuration data (BCD). Then, we show you how to repair them using command prompt:

1. Click Advanced Options in the Automatic Repair Message dialog box.

2. Please select $ 0027 Symbol of the system $ 0027 to open a command prompt. Choose command prompt from advanced options

3. Type the following commands one by one:

4. Bootrec / rebuildbcd

5. Then enter the following commands:

   Bootrec / fixMBR
   Bootrec / fixboot

   MBR and boot fixation

6. Once the processes have been completed, exit the command line and reboot the system.

7. See if the bug has been fixed.

Solution 4: reinstale Windows

Finally, if none of the above solutions fixes your problem, you only have one option. You will have to reinstall your Windows. You will lose all files from the system drive, but this will be the case if you want to use the system again. There is no other way to fix the problem.