The error condition »Device is not ready» occurs when you try to open files on your external hard drive. This mainly occurs when the external device has experienced a hardware failure or the drive is empty or not formatted.
This error can also occur for external reasons, as connection problems (when the external drive is not connected properly), damaged device (the drive is damaged or physically damaged, what prevents the computer from connecting), compatibility issues (sometimes, the hard drive is damaged). not compatible with the operating system) and due to system file corruption (system files responsible for connecting to the drive). We will go through all possible solutions and try to correct this error.
How to fix the device is not ready
-
The flash drive says “Device not ready”: This error indicates that the storage device is a flash drive or USB memory and the system cannot be connected.
-
Virtual Disk Manager dice $ 0027 The device is not ready $ 0027: This condition occurs when you cannot access your device through virtual disk manager. This probably happens when you don't have the correct permissions or there is a drive mapping issue between the operating system and the VM manager.
-
The internal hard drive shows $ 0027 The device is not ready $ 0027: This condition refers to the situation where the error is not generated on an external hard drive but on an internally connected hard drive.
Solution 1: check connection and hardware
Before moving on to software methods, you should check if the hard drive is really connected properly without any error and if the connecting SATA cable works properly without any problem.
To diagnose if the hard drive is working properly and the problem is only with the computer, you should try to connect the hard drive to another computer and check. If the error also occurs in him, try to replace the connection cable and then try to connect it again.
If you are using an external hard drive, make sure the connection cable is properly plugged into the connection port and that it is working properly.
Solution 2: run a verification disk scan
If your hard drive is connected properly but still gives the error that is being discussed, you should consider running a verification disk scan. There are cases where the external drive gets damaged or has bad sectors. This does not allow the system to properly access the hard drive and, Thus, causes the error message. We will try to run the disk check utility in hopes of repairing any problems.
-
Press Windows + S, scribe “symbol of the system” in the dialog, right-click on the app and select “Execute as an administrator”.
-
Once on the command line, run the following command. You can change the drive letter according to your needs. In this case, the letter of the album is $ 0027G $ 0027.
chkdsk g: /r chkdsk g: /f
-
Now, wait for the disk verification process to complete completely. This may take some time depending on the size of your disk and the data stored.
-
After the unit has been repaired and repaired, restart your computer and try to access it again.
Solution 3: change drive letter
If the error still doesn't go away, we can try to change the drive letter. Each drive letter is identified by a unique drive letter which also defines the navigation path from the host system. There are several cases where the drive letter conflicts with one that is already reserved by the system. We will try to change the drive letter and see if this solves the problem.
PROFESSIONAL SUGGESTION: If the problem is with your computer or laptop, you should try using Reimage Plus, which can scan repositories and replace damaged and lost files. This works in most cases, when the problem originates due to system corruption. You can download Reimage by clicking here
-
Press Windows + R, type »diskmgmt. msc »in the dialog box and hit Enter.
-
Once in disk management, right click on your drive and select »Change drive letter and paths«.
-
Click the Change button and, on the list, select another drive letter to configure.
-
After changing the drive letter, unplug the external drive and then plug it in again, check if you can access it without problems.
Solution 4: troubleshoot hardware and devices at runtime
Windows has a built-in hardware and device troubleshooter that detects any discrepancies in the hardware connected to the computer and attempts to fix them. In case the external hard drive cannot be accessed properly, the troubleshooter can look for incorrect registry values and fix drivers that are not working properly.
-
Press Windows + R, type »control panel» in the dialog box and press Enter.
-
Once in the control panel, Click on Large Icons at the top right of the screen and click
-
Now click on Hardware and Sound and on the next page select Hardware and Devices. Now let the troubleshooter do all the tasks and apply the solution if it comes up.
-
Restart your computer after repairing it and see if you can access the drive without any problem.
In addition to the solutions listed above, you can also try the solutions listed below:
-
Check if programs are already accessing the drive. If the unit is busy, you might get the error.
-
You can try reinstalling the USB controller drivers. If the driver drivers are damaged or out of date, this could cause the error condition.
-
Make sure Windows is updated to the latest version.
-
Run an SFC scan and check for registry corruption.
-
Try connecting the drive to another computer and check the error there.
-
Perform a system restore. This should be considered a last resort. If all else fails, it probably means something is wrong with Windows. If the latest system restore doesn't solve the problem too, you can also consider a fresh installation.
SUGGESTION: If none of the methods have solved your problem, we recommend that you use the Reimage repair tool, which can scan repositories to replace damaged and lost files. This works in most cases, when the problem originates due to a system corruption. Reimage will also optimize your system for maximum performance. You can download Reimage by clicking here
