▷ Solution: PS4 black screen

One phenomenon that annoys all console gamers is that the output device, namely, TV or monitor, does not detect the console and shows a black screen instead of displaying the console output. This situation is not limited to the PS4, it happens to all console devices everywhere.

Like any other console, there are some specific attributes only found on PS4, what causes the latter condition to exist. Black screen usually appears out of nowhere and causes vary substantially. People can experience this condition when they try to turn on their PS4 or they can experience this problem with their monitor when the console works fine with a TV..

We have listed a number of different fixes and fixes for you to try. Start with the first and work your way down accordingly.

Solution 1: Turn off and on your PS4

Power Cycle is a term well known to people who use computers. The power cycle is the act of completely turning off the device and draining all the accumulated energy inside it.. This will ensure that all the settings you have set are erased and that you can start over when the PS4 turns on again. It is also known to eliminate some errors or discrepancies in settings (if appropriate).

1. Turn off your PS4 device from the front of the console and put it into sleep mode.

2. After all lights on the console have gone out, unplug the power cord from the outlet.

3. Now press the power button on the PS4 during 30 seconds to make sure all power is depleted.

1. Now, Wait 2-3 minutes. Later, reconnect everything and try running the PS4. Check if the problem is solved.

Solution 2: disable HDCP

HDCP stands for High Bandwidth Digital Content Protection. It is a protection scheme to eliminate the possibility of intercepting digital data halfway between the source and the screen. Provides a security mechanism and protects data flowing from the console to the source output. It is particularly useful in public places where your connection is prone to attacks.

There is a known bug where, because HDCP is enabled, the PS4 does not show the output on the screen. Now, here's a twist; the console works on your TV but not on the monitor. Follow the steps below:

1. Connect the PS4 to a TV where you can access the console without problems.

2. Navigate to the following:

Setting> System> Enable HDCP.

Uncheck the last option by pressing once.

1. Now turn on the PS4 and try connecting it to the monitor again. Check if the problem is resolved.

Solution 3: Check the port / cable HDMI

Another thing to check is if the HDMI port is working properly. The PS4 is usually connected to an HDMI port. The PS4's HDMI port has been observed to be fragile and breaks quite easily. There will be many cases where you will be able to hear the voice instead of seeing an image on the screen.

If your PS4 used to work perfectly and after some incident or tampering, shows a black screen on the monitor / TV, this probably it means the HDMI port is broken. The HDMI cable is also damaged or stuck in the port.

Try inserting a new HDMI cable into the port and see if the problem goes away. If you suspect that the port may be damaged, have a technician check it out.

Solution 4: change resolution in safe mode

Safe mode is present on almost all consoles or computers to allow the user to perform advanced diagnostics and help update firmware, reset databases, etc. Since Play Station cannot be used in normal mode because a black screen is displayed, You can try We start the PS4 in safe mode and once inside we can change the resolution.

1. Press the power button present on the front panel of the PS4 to turn it off. The indicator will blink a few times.

2. After turning off your PS4, press and hold the power button and hold it until you hear two beeps. The first beep will be heard normally when you press it initially and the second beep when you continue to press it. (for about 7 seconds).

3. Now connect the PS4 controller with a USB cable and press the Play Station button present on the controller. You are now successfully in safe mode.

4. Select the second option »Change resolution» present in Safe Mode.

The PS4 will reboot and you can select a resolution that is actually compatible.

Solution 5: Cable management

Another solution that worked for a lot of people was tampering with the HDMI cables connected to the console and the TV.. It may not make sense, but doing this forces the console / TV to recognize the signal and display it instead of the black screen.

1. Turn on your PS4 and disconnect the HDMI cable from the TV.

2. Now completely turn off the TV. Pull out the power cord and hold down the TV's power button for a couple of seconds so that any extra power present inside can be drained.

3. Now, wait a minute or two before inserting the TV's power cord, but don't turn it on. Connect HDMI to TV too.

4. Now turn on the TV and connect to the correct channel to watch (HDMI mode).

After all the steps, the signal should be recognized and the black screen will disappear.

Solution 6: restart the PS4

The last thing you can try is restarting the PS4 from safe mode. Restarting the PS4 could erase some of your data, so make sure everything is backed up or saved to the cloud before proceeding. This solution should work if all of the above didn't work for you. Before rebooting, we will try to change the HDMI in safe mode and see if this works. If you don't, we will proceed to the restart.

1. Press the power button present on the front panel of the PS4 to turn it off. The indicator will blink a few times.

2. After turning off your PS4, press and hold the power button and hold it until you hear two beeps. The first beep will be heard normally when you press it initially and the second beep when you continue to press it. (for about 7 seconds).

3. Now connect the PS4 controller with a USB cable and press the Play Station button present on the controller. Now, once in safe mode, try swapping the HDMI cable for another HDMI cable.

4. If this doesn't work, select the first option »Restart PS4«. After reboot, the monitor / TV should detect the signal.