Monster Hunter Global Error Code 50382-MW1

Many Monster Hunter players: World cannot meet friends due to error code 50382 mw1. This particular error code on all platforms (PlayStation 4, Xbox One y Microsoft Windows). Most of the affected users report that the problem mainly occurs when they try to do a story search together with one or more friends..

Error code 50382 mw1

What is causing the error code 50382 mw1?

After researching the topic and examining various user reports, we were able to identify a couple of scenarios that seem to trigger the error code 50382 mw1. Here is a list of them along with a quick explanation:

• UPnP is not supported by the router: although the game is configured to use UPnP (Universal Plug and Play), if you have an older router, you may need to manually open some ports used by Monster Hunter.

• Wi-Fi connection is destabilizing the network connection: This error has been reported to occur frequently on laptops that have a network cable and a Wi-Fi network connected at the same time. Several users have reported that the problem was resolved as soon as they disabled the Wi-Fi connection.

• Capcom servers must be tuned to your network: in the PC, you may need to add additional startup parameters to make sure the Co-up game is stable.

• The maximum ping of the game server browser is too high: according to various user reports, This error is expected to occur if the network connection is not stable enough to support the default steam settings of 5000 pings / minute.

If you are currently trying to solve this particular problem, This article will provide you with a series of troubleshooting steps. Here is a collection of methods that other monster hunters: players around the world in a similar situation have used to solve the problem.

Please note that some of the methods listed below will not apply to your situation, depending on the platform where the problem is located. For best results, Follow the methods below in the order they are presented until you find an applicable solution that solves the problem. Let us begin!

Method 1: disconnect the Wi-Fi network (PC only)

If you encounter the error on a laptop using a wired and wireless network connection, you may want to disable the Wi-Fi component. Several users in a similar situation have managed to solve the problem by disabling the Wi-Fi connection.

If the same scenario applies to you, disable your Wi-Fi connection and see if you can join your friends in Monster Hunter: World without error code 50382 mw1.

If you see the same error message repeating, go to next method.

Method 2: Create the shortcut to the Steam network with the -nofriendsui parameter (PC only)

Multiple users who encountered this issue on Steam (PC) reported that the issue was fixed after creating a shortcut on the Steam game desktop and using a number of startup parameters.

If you wonder what these parameters do, force the Steam client to use the Friends user interface and the UDP protocol / Old TCP instead of the new WebSocket.

This supposedly avoids an issue Capcom has with their servers and could end up resolving the Error Code 50382 mw1. Here is a quick guide on how you can create a desktop icon for Monster Hunter and add two nofriendsui parameters to its launch phase:

1. Abra Steam, right click on Monster Hunter: World and select Create Desktop Shortcut.

   Note: If you haven't brought Monster Hunter: World via Steam (you are using a physical copy), skip this step entirely.

2. Right-click on the desktop shortcut and choose Properties.

3. Then, go to the Shortcut tab where we will start adding parameters to the Destination entry. To do this, we add $ 0027- nofriendsui -udp $ 0027 at the end of the Destination field and click Apply.

   Add -nofriendsui -udp or -nofriendsui -tcp parameters to Monster Hunter: World Shortcut

4. Launch Monster Hunter World via the shortcut you have created and see if the error has been resolved. If you still get the error Error Code 50382 mw1, repeat step 3 again, but this time add the parameter $ 0027-nofriendsui -tcp $ 0027 instead and hit Apply.

5. Relaunch the game and check if the mod is successful. If that is not the case, scroll down to next method below.

Method 3: change the game matchmaking navigation ping to 250

Some users have managed to solve the problem indefinitely by modifying a built-in Steam setting called Game Server Browser: Max Pings / Minute. This can resolve the error code 50382 mw1 for those of you who are using an unstable internet connection, making it easy for network problems to appear when browsing multiple game servers.

Here is a quick guide to change the in-game match search ping to 250:

1. Open steam and go to Steam> Setting (right side) using the tape on top.

2. In the right pane of the Settings menu, choose In game.

3. Then go to the bottom where it says “Game Server Browser”: Max pings / minute and change the default setting (Automatic (5000) a 250. Change the game server browser: Mox pings / minute to 250

4. Click OK to save your changes and then start Monster Hunter: World again to see if you can join your friend's session. If you keep encountering the same problem, go to next method.

Method 4: forwarding some ports on your router

Capcom Officially Recommends You Forward Some Ports Used By Monster Hunter: World if you have connectivity problems or instability. Please note that older routers were not designed to allow incoming network requests. Therefore, forwarding an incoming connection to the game through the router can greatly improve the network experience.

The exact steps to ship the required ports are highly dependent on the model and manufacturer of your router.. However, You can follow this guide as a rough guide of the steps you need to follow to get your Monster Hunter forwarded: World Ports:

1. First, you need to find out the address of your router. There are a couple of ways to do it., but let's find a method that is free and easy. Open a command window by pressing the Windows key + R, type »cmd» and hit Enter. Run the dialog: cmd and hit Enter

2. At the command prompt, type »ipconfig» and press Enter to get a summary of the Ethernet adapter. Then, scroll down to the default gateway of your connected internet network and copy it. This is the address of your router.

   

3. Open your browser and insert the IP address of the router that you obtained previously in the address bar and press Enter. Access your router's settings

4. You will be asked to enter your login credentials (Username + passwords). If you haven't changed them yourself, you may get lucky using defaults like Username: admin and Password: admin or Username: admin and Password: 1234.

   Note: your router model may have different default credentials. In this case, perform an online search with the query »* router model * + default login credentials »and you should be able to discover the default values.

5. Then, you will have to discover the IP address of the computer or console running the game. In Windows, you can easily do it by following the step 1 and finding out the IP under the IPv4 address. En Xbox One, you can find the IP address in Settings> Red> Advanced configuration. A PS4, go to settings> Red> View connection status. Find the IP address of the computer in IPv4 Address

6. Now that you have the IP address of the device running Monster Hunter, go back to your router settings and look for a Port Forwarding setting (or forwarding).

   

Then, open the connection ports required by the world of Monster Hunter. Here is a list with the ports used by the game according to various platforms:

Personal computer

TCP: 27015-27030,27036-27037
UDP: 4380,27000-27031,27036

Playstation 4

TCP: 1935,3478-3480
UDP: 3074,3478-3479

Xbox One

TCP: 3074
UDP: 88.500.3074.3544.4500

Save the changes to your router, then switch to the device that is running the game, abra Monster Hunter: World and see if the problem is resolved.