▷ How to fix Windows activation error 0xc004f063?

Several Windows users have come to us with questions after failing to activate their Windows creation. The error code that appears after this process fails is 0xc004f063. In most cases, the error code is accompanied by the error message “The Software Licensing Service reported that the computer BIOS is missing a required license”. The problem is much more common in Windows 7, but we also managed to find some occurrences in Windows 8.1 and Windows 10.

Windows activation error 0xc004f063

What Causes Windows Activation Error? 0xc004f063?

We investigated this particular matter by examining various user reports and testing the various repair strategies that some affected users have successfully used to resolve this error code and activate their version of Windows successfully..

It turns out that various causes could lead to the appearance of the Windows activation error 0xc004f063. Here is a list of possible culprits:

• License restriction: turns out a windows crash 10 may end up facilitating the appearance of a license restriction in cases where it is not applicable. If this scenario is applicable, you can solve the problem by running the Windows activation troubleshooter.

• BIOS inconsistency: a fairly common scenario that will generate this error code is a situation where the user has brought in a pre-activated computer and then restarted it. In this case, try activating a different license (like PRO on Home) will cause this error because the old key is still stored in BIOS setup. In this case, you can override the configuration using the SLMGR utility.

• System file corruption: according to several affected users, System file corruption can also facilitate the occurrence of this problem. A critical activation process can be affected by corruption of system files, so the activation is not validated. In this case, you should be able to solve the problem by running a couple of utilities (DISM y SFC) capable of cases of system corruption.

• License key inconsistency: it is also possible that the matter is completely out of your control. As some users have reported, you may see this problem due to a problem with the servers or MS seeing your license key. In this case, the only way to solve the problem is to contact a Microsoft agent and ask them to activate the key remotely.

If you are currently struggling with the same issue and one of the potential scenarios presented above seems like it could be applicable, most likely this article will allow you to solve your problem. Then, you will find a collection of possible solutions that other users in a similar situation have used successfully to solve the problem.

If you want to remain as efficient as possible, We recommend that you follow the methods listed below in the same order that we have arranged them (by difficulty and efficiency). Possibly, you will find a solution that should solve the problem regardless of the culprit that is causing it.

Let us begin!

Method 1: Run the activation troubleshooter (Windows only 10)

Before pursuing other repair strategies, let's see if your version of Windows isn't equipped to automatically resolve the issue. Please note that Windows 10 includes several different automated repair strategies that the system is capable of applying in case a familiar scenario is discovered.

If the problem is due to some kind of license restriction, Windows activation troubleshooter should be able to fix it automatically. This built-in tool contains a selection of repair strategies that will automatically resolve the issue if the activation issue is already covered by a repair strategy..

IMPORTANT: This method is only applicable if the problem is in Windows 10. If you encounter error 0xc004f063 with an older version of Windows, proceed to the next method below.

Several affected users have confirmed that they managed to resolve the activation error 0xc004f063 running the activation utility and restarting your computer. At the next start, they tried to activate the license key again and the procedure was successful.

Here's a quick guide on how to use the activation troubleshooter:

1. Press the Windows key + R to open a Run dialog. Then type »ms-settings: activation $ 0027 and press Enter to open the Activation tab of the Settings screen. Access to activation troubleshooter

2. Once you are inside the Activation tab, direct your attention to the right panel and find the Activation section (at the bottom of the screen). Once there, click the Troubleshoot button. Access the activation troubleshooter

3. Wait until the utility starts, then wait patiently until it inspects your system for inconsistencies. If a fixable problem is discovered, you will be presented with a repair strategy. To apply it, click on Apply this repair and wait for the operation to complete. Apply this repair

4. After applying the solution, restart your computer and wait for the following boot sequence to complete. After the next start, go to next method below.

Method 2: activate your Windows using SLMGR

If you see error 0xc004f063 when trying to activate a PRO key (immediately after sending), the problem is most likely due to your BIOS still using the Windows startup key. This is quite common in cases where the user previously brought in a pre-activated computer and then rebooted it.

In case this scenario is applicable, your operating system will try to activate your operating system with the key stored in your BIOS, regardless of the activation key you are trying to force. If you are in a similar situation, you can override the wrong activation key by using a series of commands entered within an elevated command prompt. This is what needs to be done:

1. Press the Windows key + R to open a Run dialog. Once inside the Run box, scribe “cmd” in the text box and press Ctrl + Shift + Enter to open a Run dialog box. When prompted UAC (User account control), click Yes to grant administrative privileges. Open command prompt

2. When inside elevated command prompt, type the following commands (hit Enter after each) to change the license key used to the correct one:

   slmgr /ipk
   slmgr /ato

   Note: Note that * window key * it's just a placeholder. You will need to replace it with your license key to complete this process successfully.

3. If the procedure completes successfully, restart the computer and see if the change takes effect on the next computer startup.

If the Windows build still does not activate despite having a valid license key, continue with next method.

Method 3: run SFC and DISM scans

It turns out that one of the most common causes that could facilitate Windows activation error 0xc004f063 is some kind of system file corruption.. In most cases, This issue occurs because a critical activation process is actually affected, so your operating system cannot validate this procedure.

If this scenario is applicable to you, the most efficient way to solve the problem is to run a series of built-in utilities capable of correcting local errors and corruption between operating system files. Note that both DISM (Deployment Image Maintenance and Management) as SFC (System file checker) are able to do this ultimately, but they do it in different ways.

DISM relies heavily on WU (Windows Update) to replace damaged items with healthy copies, while SFC relies on a locally stored file to deal with file system corruption. SFC is better for correcting logic errors, while DISM is superior when it comes to finding corrupt threads.

To maximize your chances of solving this problem, We recommend that you run both utilities to maximize your chances of fixing all corrupt instances that may end up causing the 0xc004f063 error.. Here are some step-by-step instructions on what to do:

1. Press the Windows key + R to open a Run dialog. Later, scribe $ 0027cmd $ 0027 in the text box and press Ctrl + Shift + Enter to open a command prompt with administrator access. Open command prompt

   Note: If you see the UAC message (User account control), click Yes to grant administrator access.

2. Once you are inside the raised CMD window, type the following command in order and hit Enter to start a DISM command:

   Dism.exe /online /cleanup-image /scanhealth
   Dism.exe /online / clean-image /restorehealth

   Note: Before starting this procedure, make sure your internet connection is stable. This is important because DISM uses WU to download healthy files that will be used to replace damaged items. So you know what the commands do, first (scanhealth) scan your system for inconsistencies, while the second (restorehealth) will start the repair procedure.

3. Please wait until the process is complete, then restart your computer and wait patiently until the following startup procedure is completed. After that, follow the step 1 one more time to open another elevated CMD notice. But this time, type the following command and hit Enter to start a SFC scan:

   sfc /scannow

   Note: Regardless of the circumstances, do not interrupt this procedure before it is finished (even if you see it freeze for a couple of minutes). Doing this puts your system at risk and could end up with other logic errors that could create additional logic errors..

4. After the second scan of the system files has finished, restart your computer and see if the problem is resolved on the next system startup.

If you have followed the instructions above and still encounter error 0xc004f063, scroll down to the next method.

Method 4: contact Microsoft technical support

If none of the above methods have prevented you from activating Windows build and you still encounter error 0xc004f063, the best thing to do is contact Microsoft's support team and ask them to activate your operating system.

There are a couple of different ways to do this, but the most convenient way to fix it is to contact a Microsoft agent using the toll-free number specific to your region.

Here is a list (here) with country-specific phone numbers. Note that, based on your region and the number of support agents that are active in that time frame, you may need to wait a couple of hours before contacting a live agent.

Once I can talk to a human, You will be asked several security questions to confirm that you have the license key you are trying to activate. If everything goes well, they will activate your Windows build remotely.