▷ How to fix error 0x80300024 when installing Windows

The error code 0X80300024 is one of the different error codes that you may encounter when trying to install any version of the Windows operating system on a computer.. The error code 0X80300024 is accompanied by an error message that says something like “Windows cannot be installed in the selected location”. Error code 0X80300024 points to some kind of problem (software o hardware) with the partition of the hard disk that is the destination of the Windows installation in question. Error code 0X80300024 can be caused by anything, from insufficient space on the target hard drive or damaged or corrupted installation media to a damaged hard drive, dying the corrupt.

What's more, error code 0X80300024 has also followed the Windows operating system in all its iterations, therefore both Windows users 7 like windows 10 are likely to run into it when trying to install Windows. Fortunately, error code 0X80300024 is not the end of the world; The following are some of the most effective solutions that you can use to try to get rid of the error code 0X80300024 and install Windows correctly:

Solution 1: Remove unnecessary hard drives

If you have more than one HDD connected to your computer and try install Windows in one of them, the other hard drives may interfere with the installation, causing the installation to fail and the error code appears. 0X80300024. To make sure this is not the case, Remove the hard drives that you do not want to install Windows on from the computer and try the installation again to determine whether or not the problem persists.

Solution 2: try plugging the installation media into a different USB port

If you are trying to install Windows from USB using the proper installation media, like most people do, the cause of this problem could simply be the USB port to which the installation media is connected. Try installing Windows with the USB with the installation media inserted into a different USB port: change a USB port 2.0 to a USB port 3.0 or vice versa and check if this allows Windows to install properly.

Solution 3: make sure the destination drive is at the top of the computer boot order

You may see error code 0X80300024 because the hard drive you are trying to install Windows on is not at the top of your computer's boot order. At the beginning, each computer has an order of sources from which it tries to start the operating system, and this order is configured through the BIOS of the average computer. To solve this problem, all you need to do is make sure the target hard drive is at the top of the computer boot order:

1. Turn on your computer.
2. On the first screen that appears when the computer starts, you will find instructions for pressing a specific key, what, In most cases, is Delete, F1 o F2, to enter BIOS / configuration of your computer. Press the specified key to enter BIOS.
3. In BIOS, locate the boot order / configuration of your computer. In most cases, the boot order is found in the BIOS boot tab.
4. Adjust the boot order so that the hard drive you are trying to install Windows is on top.
5. While in BIOS, also make sure you have selected “UEFA” as start mode. The option must be in the section “start” BIOS. UEFI Boot Mode Settings
6. Exit the BIOS of the computer, but be sure to save the changes you made to it before doing so.

Once this is done, restart windows installation and see if it succeeds or not.

Solution 4: format the installation site

If the hard drive partition you are trying to install Windows on has been used previously and is not a newly created partition, some of the data it contains may be interfering with the installation of Windows. For this reason, It is always recommended to format the installation location before installing Windows on a computer. If the install location data is causing this problem in your case, fully formatting the install location should solve the problem.

1. Insert the bootable Windows installation media into your computer and restart it. If you don't have the Windows installation media ready, you will need to create one.
2. When the computer starts, choose boot from inserted installation media.
3. Set the language, the keyboard distribution and other preferences.
4. When asked what type of Windows installation you want, click Customize.
5. When asked where you want to install Windows, first click on Drive Options (advanced).
6. Click on the partition on your hard drive where you want to install Windows to select it and click Format.
7. Confirm the action.
8. Wait for the disk partition to be completely formatted and then click Next to continue with the installation.
9. If that doesn't work, select the drive and click “Erase” instead of “Format”. Erase the primary partition
10. This will convert the hard drive to unallocated space and you can reallocate it.
11. return to create partition and install windows on it.
12. If the error still persists, click on “Clean up” again and let it remain as unallocated space.
13. Boot from the installation media and select this unallocated space to install Windows.
14. Check if the problem persists.

Solution 5: Replace the hard drive

If absolutely none of the solutions listed and described above have worked for you, you may have a dying or dead hard drive. A dying hard drive can certainly prevent an operating system like Windows from being installed, so if all else fails, replace your hard drive with a new one and that will save you from error code 0X80300024.

Solution 6: use DiskPart

In some cases, the error can be triggered if there is corruption in the partition tables of the drive. Therefore, in this step, we will use DisakPart to solve this problem. For that:

1. Identify the partition “System” when config list all partitions and note their name.
2. Press “Shift” + “F10” and then write “Diskpart”. Open Diskpart tool
3. Now, scribe “List disk” to list all partitions. List the discs available in DISCO PART
4. Scribe “Select disk (the partition number, If i were 1, then i would write select disk 1)”.
5. Now write “Clean up” and press “Enter”.
6. Check if the problem persists.