Windows cannot stop your generic volume device

Some Windows users get the error $ 0027. Windows cannot stop your Generic Volume Device because a program is still using it $ 0027 when trying to eject an external hard drive or USB flash drive. Affected users report that they tried to kill all processes and stop all services, but the problem persists. The problem is confirmed to occur in Windows 7, Windows 8.1 and Windows 10.

Windows cannot stop your device from $ 0027 generic volume $ 0027 because a program is still using it

What is causing the error “Windows cannot stop your generic volume device”?

We investigated this particular issue by examining various user reports and the repair strategies that affected users have been using to resolve this particular issue.. According to our research, There are several common scenarios that could end up causing this particular error message:

• The system is actively using the drive: many processes can end with the USB drive. Please note that just looking at the contents of the drive within File Explorer may end up triggering this error message. In this case, the simplest solution is to simply end the explorer.exe process.

• At the moment, Windows is copying a large file from disk: another common reason that will trigger the error is if your operating system is copying a file from disk. In this case, waiting for the operation to complete is the best course of action.

• Error de Windows (conime.exe stuck on disk): there is quite a popular Windows error present in Windows 7, Windows 8.1 and Windows 10 where a process (conime.exe) will get stuck on disk and could trigger this particular error. In this case, the simplest solution is to simply restart the computer.

• Windows is over-indexing all files: if the drive is set to indexed, your operating system may be trying to index all the files on your drive. If you have a lot of files on the drive, this process will take a while and you may see the error when trying to remove the drive.

• Unit is not configured for quick removal: this particular issue can occur if the drive involved is not set up for quick removal. Some affected users have reported that the issue no longer occurs after changing the removal policy.

If you are currently having trouble resolving the error $ 0027 Windows cannot stop your Generic Volume Device $ 0027, this article will provide you with some troubleshooting guides. Then, you will find a collection of methods that other users in a similar situation have used to solve the problem.

For best results, follow the methods in the order they are presented, since they are ordered by efficiency and gravity. One of them will surely solve the problem in your particular scenario..

Method 1: end the explorer.exe process

A quick fix that many of the affected users have been using is to simply close the explorer.exe process. It has been confirmed to work on Windows 7, Windows 8.1 and Windows 10.

However, several affected users have reported that, although the method has helped them avoid $ 0027, Windows cannot stop your generic volume device from $ 0027, the solution was only temporary and came back the next time they tried to remove the USB powered device.

But if you are looking for a quick way to resolve the error, here's how to end the explorer.exe process:

1. Presione Ctrl + Shift + Esc to open Task Manager.

2. Inside Task Manager, go to the Processes tab and look for exporer.exe (Windows Explorer in Windows 10).

3. Once you can locate the process, right click on it and choose End Task. End the explorer.exe task

   Note: Another alternative to this method is to reboot the system and perform the same operation that caused the error immediately after system startup..

4. Once the explorer.exe process is complete, repeat the action that caused the above error and see if the problem is resolved.

If you keep seeing the error $ 0027 Windows cannot stop your Generic Volume Device $ 0027 or are you looking for a more durable solution, proceed to the next method below.

Method 2: drive setup for quick removal

If you encounter the problem on a USB h, the reason you are running into this problem is most likely because the drive you are having the problem with is not set up for quick removal. Fortunately, you can fix the default behavior by following a series of simple instructions.

Here's what you need to do to set up your USB drive for quick removal:

1. Open File Explorer (Mi PC en Windows 8.1 previous one), right click on the drive that is causing the problem and choose Properties.

2. Go to the Hardware tab, select the drive to go to from the All drives list and choose Properties.

3. In the Properties window of your USB drive, go to the General tab and click Change settings.

4. Inside the Properties menu of your USB device, go to the Policies tab and select Quick Delete under Delete Policy.

5. Click OK and restart your computer to apply the changes.

6. In the next start, repeat the action that was causing the problem above and see if the error still appears.

USB hard drive setup for quick removal

If you still find the error $ 0027 Windows cannot stop your Generic Volume Device $ 0027, go to next method.

Method 3: configure USB drive to work $ 0027 Office $ 0027

Some users have managed to solve the problem by using the Disk Management utility to configure the USB powered drive to work in offline mode. Forcing the drive into offline mode is likely to remove any links that may be causing the error $ 0027. Windows cannot stop the generic volume device $ 0027.

Here is a quick guide to configure the USB drive to work in offline mode:

1. Press the Windows key + R to open a Run dialog. Then type »diskmgmt.msc» and hit Enter to open the Disk Management utility. If the UAC (User Account Control) request it. Run dialog: diskmgmt.msc

2. Inside the Disk Management utility, right click on the USB device that is causing the problem and choose Offline. Force the unit to work in offline mode

3. Re-create the same operation that previously caused the error $ 0027. Windows cannot stop your Generic Volume Device $ 0027 and see if the problem has been resolved.

If you still encounter the same error message, go to next method.

Method 4: change drive letter

It turns out that this particular problem can also be fixed with a simple trick to change the affected drive letter. This will not even condition you to continue using a different letter, since you can change it again and the error $ 0027 Windows cannot stop your Generic Volume Device $ 0027 It will not happen again.

This solution is effective because when the drive letter changes, it will also disconnect the drive from all processes that are currently using it. Once this process is finished, you can disassemble the unit in the usual way.

Here is a quick guide on how to change the disc letter:

1. Press the Windows key + R to open a Run dialog. Then type »diskmgmt.msc» and hit Enter to open Disk Management. When prompted UAC (User account control), click Yes to grant administrative privileges. Run dialog: diskmgmt.msc

2. Inside the Disk Management utility, go to the first menu and locate the unit that is causing the problem. Later, right click on it and choose Change Drive Letter and Paths.

   Access the menu Change letter and routes

3. In the menu Change drive letter and paths, click Change. Then, enable the toggle associated with Assign the following drive letter and select a different letter from the list. Click OK to save the changes. Assign a different letter to the affected drive

4. You will receive a warning message. When I see it, click Yes to confirm. Accept the warning notice

5. When modifications are complete, restart your computer and see if the problem is solved. If so, you can go back to the previous drive letter by reverse engineering the steps above.

If this method has not been effective and you still encounter the error $ 0027 Windows cannot stop your Generic Volume Device $ 0027, go to next method.

Method 5: change the file system to FAT32

Some users have managed to solve the problem simply by changing the file system to FAT32. Although the majority of affected users have reported that the error $ 0027 Windows cannot stop your Generic Volume Device $ 0027 no longer produced with FAT32, you will not be able to copy files larger than 4 GB.

If that's not a big deal for you, here is a quick guide on how to change file system to FAT32:

1. Open File Explorer (My PC), right click on the drive showing the error message and choose Format. Format a USB-powered drive

2. Inside the Format menu, set the File System to FAT32 using the drop down menu below. Format a drive in FAT32

   Note: If you are in a hurry, it's better to check the Quick Format box in Formatting Options. This ensures that the process will not take more than 10 minutes.

3. Once the process is complete, restart your computer and see if the problem is resolved on the next startup.