▷ How to fix error 0X80071AC3 “The volume is dirty

When trying to access files on disk or copy them to disk, if Windows cannot read data from the disk or write data to it, it will throw you an error message with error code 0x80071AC3. This issue affects all currently supported versions of the Windows operating system and, although it is more common on external data storage drives, such as external hard drives and USB sticks, the problem is also known to affect internal hard drives and SSD drives.

The error code 0x80071AC3 is accompanied by an error message stating that Windows could not complete the operation in question because the volume (the disk that Windows is trying to read or write) it's dirty. This problem can be caused by anything, from bad sectors on the disk in question to a feature like ReadyBoost that prevents Windows from reading or writing to the disk in question. Fortunately, However, as long as the affected data storage disk does not die or die, Much can be done to try to get rid of error code 0x80071AC3 and get Windows to correctly read or write to the affected disk.

The following are some of the most effective solutions that you can use to try to solve this problem.:

Solution 1: use CHKDSK to try to solve the problem

CHKDSK is a Windows utility that can scan any data storage disk for problems like bad sectors and file system errors and attempt to repair them. Running CHKDSK on the affected disk is a pretty good idea, as CHKDSK could successfully detect and fix whatever is causing you to see error code 0x80071AC3. To run CHKDSK on a specific storage disk, needs to:

1. Go to Computer, either through Windows Explorer or through the Start menu.

   

2. Right-click the storage disk affected by this problem and click Properties.

   

3. Go to the Tools tab.

4. Click Verify Now … o Check (whatever corresponds) in the Error checking section.

   

5. In the dialog that opens, check both options to enable them and click Start.

6. Wait for CHKDSK to complete the scan and try to get rid of any issues it finds.

7. Once CHKDSK has finished working its magic, try to do what you were doing before it caused error code 0x80071AC3 and see if the problem persists or not.

Solution 2: deshabilite ReadyBoost

Many external USB sticks come with a built-in ReadyBoost disk caching feature. ReadyBoost is designed to improve the performance of USB sticks, but it can also, in some cases, cause user to see error code 0x80071AC3 when trying to read or write to the drive. If you experience this problem when trying to read or write to a USB drive and ReadyBoost is the culprit, disabling ReadyBoost might be enough to solve the problem. To disable ReadyBoost, needs to:

1. Navigate to Computer, either through Windows Explorer or through the Start menu.

   

2. Find the external USB drive affected by the problem, right click on it and click Properties.

3. Navigate to the ReadyBoost tab.

4. Enable the Do not use this device option.

   

5. Click Apply.

6. Click ok.

When I finish, check whether the problem has been solved or not.

Solution 3: reinstall the drivers for the affected disk drive

1. Press the Windows logo key + X to open the WinX menu.

   

2. Click Device Manager.

   

3. Double click on the disk drives section to expand it.

4. Find the drive affected by this problem, right click on it and click Uninstall.

5. When asked to confirm the action, click ok.

6. Remove the disk from your computer and restart your computer.

7. When your computer starts, repeat the steps 1 Y 2.

8. Connect the disk drive to your computer and click Action> Check for hardware changes.

   

9. Wait for Windows to successfully reinstall the disk drive and its drivers, and then check if the error code 0x80071AC3 still persists.

Solution 4: make sure writing to disk drives is allowed in the registry

You may run into error code 0x80071AC3 because your computer's registry is set to not allow your computer to write to disk drives in general or the disk drive that you are experiencing this problem with.. To ensure that writing to disk drives is allowed in the computer's registry, should:

1. Press the Windows logo key + R to open a Run dialog.

   

2. Type regedit in the Run dialog box and press Enter to start Registry Editor.

   

3. Navigate to the following directory in the left pane of Registry Editor:

HKEY_LOCAL_MACHINE> SYSTEM> CurrentControlSet> Control

1. In the left pane of Registry Editor, find and click the StorageDevicePolicies key to display its content in the right pane.

2. In the right pane of Registry Editor, Find and double click on the registry value called WriteProtect.

3. See what is the value of WriteProtect. If the Value field contains 1, That's his problem: your registry is set to prevent your computer from writing to the drive in question. If that's the case, replace the 1 in the Value field with 0 and click OK.

   

4. Close Registry Editor and restart your computer.

5. When your computer starts, check if the problem is solved.

Solution 5: try to repair the disk drive from a command prompt

1. Press the Windows logo key + X to open the WinX menu.

   

2. Click Command Prompt (Administrator) from the WinX menu to start an elevated command prompt with administrative privileges.

   

3. Type the following at the elevated command prompt, replacing X with the drive letter corresponding to the drive affected by this problem, and press Enter:

chkdsk X: / B

1. This specific iteration of the chkdsk command will cause the utility to check the affected disk drive for bad clusters, bad sectors and other problems and try to repair them. All you have to do is wait for the utility company to perform the analysis and repairs..

Once the process is complete, try to do whatever it was you were doing before and see if you still run into error code 0x80071AC3.

Solution 6: format the affected disk drive

If all else fails, you still have one more option, as well as simply replacing the affected unit with a new one: format. A full format of the affected drive will remove everything on it, including data stored on the unit and (hopefully) whatever is causing you to see error code 0x80071AC3 when trying to read or write. the disc. To format the affected disk drive, should:

1. Navigate to Computer, either through Windows Explorer or through the Start menu.

   

2. Find the affected drive, right-click and click Format ....

   

3. Click the Restore Device Defaults option.

   

4. Click Start.

   

5. If you are asked to confirm the action, confirm it.

6. Wait for the disk drive to be completely formatted.

After the disk drive is formatted, check if the problem has been solved.